• abe1b1b010899298c89a054e3912fa46 (1)

GDS-2000E Series

Features

  • Features
    • 200/100/70MHz Bandwidth Selection; 2 or 4 Channels
    • 1GSa/s Real-Time Sampling Rate for Each Channel (2ch model) ; 1GSa/s Maximum Real-Time Sampling Rate (4ch model)
    • Standard 10M Maximum Memory Depth and VPO Waveform Display Technology
    • Waveform Update Rate of 120,000 wfm/s
    • 8 ” WVGA TFT LCD Display
    • FFT with Maximum 1M points to Provide Higher Frequency Domain Resolution Measurement
    • High and Low Pass Digital Filter Functions
    • 29,000 Sections of Segmented Memory and Waveform Search Functions
    • I2C/SPI/UART/CAN/LIN Serial Bus Trigger and Decoding Function
    • Data Log Function Tracks Signal Changes Up To 100 hours
    • Provide Remote Internet Storage Function

 

  • Ordering Information

    Ordering information

  • Description

    Product Description

    The GDS-2000E digital oscilloscope features bandwidth selections of 200MHz, 100MH, and 70MHz. Two-channel model provides 1GSa/s real-time sampling rate for each channel; four-channel model provides 1GSa/s maximum real-time sampling rate. The 8-inch 800*480 TFT LCD display and the minimum 1mV/div vertical range allow the GDS-2000E series to measure complex feeble signals and clearly display measurement results.

    With respect to the memory depth, the GDS-2000E series digital oscilloscope provides 10M long memory for users to completely retrieve and analyze waveforms. Users, based upon the application requirements, can select 1K, 10K, 100K, 1M or 10M memory depth. Short memory depth collocating with the high sampling rate allows users to observe fast-changing waveforms and, on the other hand, long memory depth aims for continuously changing waveforms. The GDS-2000E series is equipped with waveform search and segmented memory functions to expand the flexible applications of 10M long memory. The segmented memory can be divided the maximum into 29,000 sections for users to bypass any unimportant waveforms so as to swiftly search all required waveforms. With the function, more meaningful waveforms can be saved and target waveforms can be displayed rapidly. With the waveform search function, users can rapidly search desired waveforms according to the required trigger conditions.

  • Specifications

    Specifications

    • Specifications
      GDS-2072E GDS-2074E GDS-2102E GDS-2104E GDS-2202E GDS-2204E
      Channels 2ch+Ext 4ch 2ch+Ext 4ch 2ch+Ext 4ch
      Bandwidth DC~70MHz DC~70MHz DC~100MHz DC~100MHz DC~200MHz DC~200MHz
      (-3dB) (-3dB) (-3dB) (-3dB) (-3dB) (-3dB)
      Rise time 5ns 5ns 3.5ns 3.5ns 1.75ns 1.75ns
      Bandwidth Limit 20MHz 20MHz 20MHz 20MHz 20M/100MHz 20M/100MHz
      Vertical Sensitivity
      Resolution 8 bit
      :1mV~10V/div
      Input Coupling AC, DC, GND
      Input Impedance 1MΩ// 16pF  approx.
      DC Gain Accuracy ±(3%)when 2mV/div or greater is selected
      ±(5%)when 1mV/div is selected;
      Polarity Normal & Invert
      Maximum Input Voltage 300Vrms, CAT I
      Offset Position Range 1mV/div ~ 20mV/div : ±0.5V
      50mV/div ~ 200mV/div : ±5V
      500mV/div ~ 2V/div : ±25V
      5V~10V/div : ±250V
      Waveform Signal Process  +, -, ×, ÷, FFT, FFTrms ,User Defined Expression.
      FFT:1Mpts
      FFT: Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMSFFT Window : Rectangular, Hamming , Hanning, Blackman-Harris
      Trigger
      Source CH1 ,CH2, CH3, CH4, Line, EXT*
      *EXT only on dual channel models
      Trigger Mode Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single Sequence
      Trigger Type Edge, Pulse Width(Glitch), Video, Pulse Runt, Rise & Fall(Slope), Alternate, time out, Event-Delay (~65535 events), Time-Delay (Duration,4nS~10S), Bus
      Hold-off range 4ns~10s
      Coupling AC,DC,LF rej. ,HF rej. ,Noise rej.
      Sensitivity 1div
      External Trigger  (2ch model only)
      Range ±15V
      Sensitivity DC ~ 100MHz Approx. 100mV
      100MHz ~ 200MHz Approx. 150mV
      Input Impedance 1MΩ±3%~16pF
      Horizontal
      Time base Range 1ns/div ~ 100s/div (1-2-5 increments)
      ROLL: 100ms/div ~ 100s/div
      Pre-trigger 10 div maximum
      Post-trigger 2,000,000 div maximum.
      Time base Accuracy ±50 ppm over any ≥ 1 ms time interval
      Real Time Sample Rate Max.:1GSa/s (4ch model)
      Per channel 1GSa/s (2ch model)
      Record Length Max:10Mpts
      Acquisition Mode Normal, Average, Peak Detect, Single
      Peak Detection 2ns (typical)
      Average selectable from 2 to 256
      X-Y Mode
      X-Axis Input Channel 1; Channel 3*
      *four channel models only
      Y-Axis Input Channel 2; Channel 4*
      *four channel models only
      Phase Shift ±3° at 100kHz
      Cursors and Measurement
      Cursors Amplitude, Time, Gating  available Unit: Seconds(s),Hz(1/s) ,Phase(degree) ,Ration(%)
      Automatic Measurement 36 sets: Pk-Pk, Max, Min, Amplitude, High, Low, Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, ROV Shoot, FOV Shoot, RPRE Shoot, FPRE Shoot, Frequency, Period, Rise Time, Fall Time, +Width, -Width, Duty Cycle, +Pulses, -Pulses, +Edges, -Edges, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF, Phase ,Cursor measurements
      Control Panel Function
      Auto counter 6 digits, range from 2Hz minimum to the rated bandwidth
      Autoset Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo  Autoset
      Save Setup 20set
      Save Waveform 24set
      Display
      TFT LCD Type 8" TFT LCD WVGA color display
      Display Resolution 800 horizontal × 480 vertical pixels (WVGA)
      Interpolation Sin(x)/x
      Waveform Display Dots, vectors, variable persistence (16ms~4s), infinite persistence
      Waveform Update Rate 120,000 waveforms per second, maximum
      Display Graticule 8 x 10 divisions
      Display mode YT ;XY
      Interface
      USB Port USB 2.0 High-speed host port X1, USB High-speed 2.0 device port X1
      Ethernet(LAN) Port RJ-45 connector, 10/100Mbps with HP Auto-MDIX
      Go-NoGo BNC 5V Max/10mA TTL open collector output
      Kensington Style Lock Rear-panel security slot connects to standard Kensington-style lock.
      Miscellaneous
      Multi-language menu Available
      operation environment Temperature: 0°C to 50°C. Relative Humidity ≤ 80% at 40°C or below; ≤ 45% at 41°C ~ 50°C.
      On-line help Available
      Time clock Time and Date ,Provide the Date/Time for saved data
      Dimensions 384mmX208mmX127.3mm
      Weight 2.8kg
  • Accessories

    Accessories

    • Quick Start Guide x1, User Manual CD x1, Power Code x1GTP-070A-4 : 70MHz (10:1/1:1) Switchable passive probe for GDS-2072E/2074E (one per channel)
      GTP-150A-4 : 150MHz (10:1/1:1) Switchable passive probe for GDS-2102E/2104E (one per channel)
      GTP-300A-4 : 300MHz (10:1/1:1) Switchable passive probe for GDS-2202E/2204E (one per channel)
  • Download

    Downloads

    http://www.gwinstek.com/en-global/Support/download

Close[X]